ASI 0184 - Surface Mounted Sensor Hand Dryer

$892.50
$729.95

18% You Save: $162.55

SKU:
ASI0184
Warranty:
10 years
Shipping:
Calculated at checkout
Compare 2 or more products
Only Available in Canada

ASI 10-0184 - Surface Mounted Sensor Hand Dryer - White

POWER

277V 50/60Hz 7.9 Amps

SPECIFICATION

Surface Mounted Hand Dryer operates automatically from IR sensor that shall activate dryer when hands are placed in sensor zone. Motor and heating element shall have internal resetting automatic thermal protection. Cover shall be fabricated of one-piece, 16 gauge (.063", 1.6) thick drawn steel and shall have all exposed surfaces finished with acid, chip and scratch resistant porcelain enamel or shall be 16 gauge stainless steel with bright or satin finish per option selected. Fixed directional air vanes shall be heavy duty, rust proof and tamper resistant. Air intake slots shall not allow access to internal parts. Back plate shall be furnished with vibration isolating mounting bushings. Circuitry shall have self-adjusting time-out and fail-safe off protection controlled by a microprocessor that shall detect and reject false signals and shall automatically self calibrate to provide uniform sensitivity over its entire life span. Entire unit shall be internally electrically grounded. Dryer unit shall have approval and be listed under the re-examination services of Underwriters Laboratories, Inc. Unit shall be warranted against defects in materials or workmanship for Ten (10) years.

INSTALLATION

Unit is surface mounted on wall with four (4) 1/4" screws, washers and bushings (supplied) through rubber grommets (supplied) in a corrosion protected formed heavy steel back plate. For masonry walls use expansion bolts or anchors for 1/4" (6) screws. Electrical service is supplied and connected (by others) prior to installing cover. Cover is secured to back plate with two (2) hex socket security screws (supplied). For compliance with ADA Accessibility Guidelines, unit should be installed so that bottom edge of dryer is 48" (1219) maximum above finished floor (AFF). For general utility install unit so that bottom edge of dryer is 45" to 50" (1143 to 1270) AFF. For two or more dryers, dryers should be no closer than 24" (610) on center.

OPERATION

Dryer is activated by user placing hands under sensor. Dryer automatically shuts off after time-out when user removes hands from sensor zone.

Warranty: 10 years

 

View product reviews of the ASI 0184 - Surface Mounted Sensor Hand Dryer.

Easy Returns:
You may return most new, unused items within 30 days of delivery if you are not completely satisfied. Returned merchandise must be shipped in original packaging, freight prepaid, and in resalable condition and is subject to a 25% restocking fee.
Exceptions:
For health reasons we cannot return sanitary napkin/tampon disposals, shower seats, shower curtains and specimen cabinets. Replacement parts and refills are also not eligible for refunds.

More By: American Specialties Inc.

View more products by for great deals on a full range of top-of-the-line bathroom equipment, supplies and accessories.