Bobrick 770 - QuietDry Series, DuraDry™, High Speed Hand Dryer, Surface-Mounted
NOTE: This item has been discontinued and has been replaced with the newer B7180 model by Bobrick. Click here to see the new model.
POWER OPTIONS:
B770 115V
B770 230V
High speed white high-gloss epoxy finish electrostatically applied. Unit is equipped with single outlet for efficient dry time. The unit shall be uniquely designed to have a sound pressure level of 72dB(A) measured at 39" (1 meter) from source. The unit shall be CE marked, cULus Listed, & VDE approved.
MATERIALS:
Cover — Aluminum die-casting with white high-gloss epoxy finish electrostatically applied (B-770) or chrome finish (B-778). Air-inlet opening is equipped with vandal-resistant grill. Cover is secured to mounting base with two concealed, recessed hexscrews.
Air-Inlet Grill – One-piece vandal resistant aluminium die-casting, with black high gloss epoxy finish electrostatically applied.
Mounting Base — Equipped with four 0.236" (6mm) diameter mounting holes and one 7/8" (22mm) diameter hole suitable for between-wall wiring.
Motor/Fan — Thermally-protected, Universal, 1/10 hp, 7000 rpm motor construction with shielded ball-bearings. Single-inlet forward-curve impeller, providing air volume of 112m3 /Hr (66 cfm); air velocity of 46 m/s (9000 lfm).
Heating Element — Coiled Nichrome heating element mounted on a mica frame, protected by integral automatic thermal overload device. To heat air without hot spots and remain inaccessible to vandals.
Electronic Control — Infrared sensor automatically turns dryer on when hands are held under air-outlet opening and across path of sensor. Remove hands from path of sensor and dryer stops. Electronic sensor has automatic shutoff approximately 1-1/2 minutes after dryer turns on if an inanimate object is placed across air-outlet opening. After inanimate object is removed, electronic sensor automatically resets itself and dryer operates normally.
OPERATION: No-touch operation: electronic sensor automatically turns dryer on when hands are held under air-outlet opening and across path of sensor. Remove hands from path of sensor and dryer stops. Dryer will not stop by itself before user is satisfied hands are dry. Dryer operates only when actually drying hands which saves energy and operating costs. Electronic sensor will automatically shut dryer off 1-1/2 minutes after dryer turns on if an inanimate object, such as tape or chewing gum, is placed across air-outlet opening. After inanimate object is removed, electronic sensor automatically resets itself and dryer operates normally.
Warranty: 10 years
View product reviews of the Bobrick B-770 - DuraDry™ Surface Mounted High Speed Hand Dryer.
