Bobrick 715 - Elan Surface-Mounted Hand Dryers – 115V
Contemporary styling, satin-finish type 304 stainless steel cover. Automatic hand sensor.
B-715 115V AC, 15 Amp, 60 Hz, 1/25 Watts, cULus Listed.
MATERIALS:
Cover - One-piece, deep drawn, 20-gauge (0.9mm), type-304 stainless steel with satin finish. Cover is secured to mounting base with three flat-head stainless steel screws.
Mounting Base and Fan Housing - 5/64" (2mm) thick fire-retardant molded plastic with high-gloss finish. Plastic air-inlet grille fits into bottom of mounting base. Plastic air-outlet grille is secured between fan housing and mounting base.
Motor - Maintenance-free capacitor run, external rotor motor with sealed ball bearings at both ends of drive shaft. Equipped with an automatic thermal-overload switch.
Fan - Dynamically balanced 5-15/64" (133mm) diameter rotor centrifugal fan with multiple metallic vanes. Directs air flow from heating element at 100 cfm, mixes air to provide uniform temperature.
Heating Element - Coiled nickel-chrome heating element is protected by an automatic thermal-overload switch and thermal fuse. Heating element, which is located on inlet side of fan, heats air without hot spots — inaccessible to vandals.
Electronic Control - Infrared sensor automatically turns dryer on when hands are held under air-outlet opening and across path of sensor. Remove hands from path of sensor and dryer stops. Electronic sensor has automatic shutoff approximately two minutes after dryer turns on if an inanimate object, such as tape or chewing gum, is placed across sensor lens. After inanimate object is removed, electronic sensor automatically resets itself and dryer operates normally.
OPERATION:
No-touch operation. Electronic sensor automatically turns dryer on when hands are held under air-outlet opening and across path of sensor. Remove hands from path of sensor and dryer stops. Dryer will not stop by itself before user is satisfied hands are dry. Dryer operates only when actually drying hands, which saves energy and operating costs. Electronic sensor will automatically shut dryer off two minutes after dryer turns on if an inanimate object is placed across sensor lens. After inanimate object is removed, electronic sensor automatically resets itself and dryer operates normally.
Warranty: 5 year limited to repair or exchange of defective parts
View product reviews of the Bobrick B-715 - Elan™ Surface-Mounted Hand Dryers - 115V.
